Mixing Mayco Stroke & Coat Glazes: What You Need To Know

Mayco Stroke & Coat is a highly versatile, non-toxic, food-safe glaze that can be applied to wet clay, leather-hard clay, greenware, earthenware bisque, or stoneware bisque. It can be fired from cone 06 to cone 10, in oxidation or reduction, and can be used decoratively in a multitude of ways. The Stroke & Coat glaze is available in over 70 vibrant bright and pastel shades, with small specks of colour added to some base glazes for visual interest and texture. The product is marketed as goof-proof and forgiving, making it a good option for novice potters, and it is also used by professionals.

Mayco Stroke & Coat glaze can be applied to wet clay, leather-hard clay, greenware, and bisque

Mayco Stroke & Coat glaze is a highly versatile product that can be applied to wet clay, leather-hard clay, greenware, and bisque. It is the industry's most versatile glaze and can be used in a wide range of decorative ways.

When applying Mayco Stroke & Coat glaze to wet clay, it is important to note that the clay should be leather-hard. This means that the clay has dried slightly but is still pliable and can be easily scratched with your fingernail. This allows the glaze to adhere properly to the surface of the clay. Applying glaze to wet clay can be done by brushing, dipping, or spraying, depending on the desired effect.

For greenware (unfired clay), Mayco Stroke & Coat glaze can be applied in the same way as for wet clay. However, it is important to ensure that the greenware is completely dry before applying the glaze to avoid cracking or other defects.

Mayco Stroke & Coat glaze can also be applied to bisque, which is clay that has been fired once. This technique is often used in the "One Fire" method of decorating, where the glaze is applied to the bisque, allowed to dry, and then fired, resulting in a fool-proof finish. Depending on the desired level of transparency, one to three coats of glaze can be applied.

Overall, Mayco Stroke & Coat glaze is a versatile product that can be applied to a variety of clay surfaces, offering endless decorative possibilities for potters and artists alike.

It can be fired from cone 06 to cone 10

Mayco Stroke & Coat is a highly versatile glaze that can be fired from cone 06 to cone 10. This wide firing range allows for a variety of effects and applications, making it a popular choice for ceramic artists.

When fired at cone 06, Stroke & Coat produces a glossy finish that does not require an additional clear glaze. However, a clear glaze can be applied to enhance the glossiness of the fired finish. It is important to note that over-glazing can lead to dull or "milky" finishes, so it is recommended to adjust the number of glaze layers or lighten the amount of glaze applied to avoid this issue.

At mid-range firing temperatures of cone 5-6, Stroke & Coat continues to perform well. The colours may darken slightly compared to cone 06 results, but the glaze remains stable and reliable.

For high-fire results at cone 9-10, darker colours such as green, red, blue, orange, and purple will maintain their colour value, although they may become slightly darker. Lighter colours, such as pink, yellow, tan, and lighter purples, will fade at these higher temperatures. It is always recommended to test Stroke & Coat on a specific project to ensure the desired results.

The versatility of Stroke & Coat allows for a range of creative possibilities. It can be applied to greenware or bisque, and it can be used on earthenware, stoneware, or porcelain. The thickness of the application will also affect the final result, with translucent and watercolour effects achieved with thin coats and full opacity with thicker applications. Additionally, Stroke & Coat glazes can be blended to create new colours, further expanding the creative options for artists.

In conclusion, Mayco Stroke & Coat's ability to be fired from cone 06 to cone 10 makes it a versatile and forgiving glaze, suitable for a wide range of ceramic projects and firing techniques. Its heavy-bodied nature and wide range of colours make it a popular choice for both novice and experienced ceramic artists.

It is available in over 70 colours

Mayco Stroke & Coat glazes are available in over 70 vibrant bright and pastel shades. The liquid state accurately represents the fired colour. The colours can be mixed to create new colours. The glaze can be applied to greenware or bisque and can be fired from cone 06 to cone 10. The glaze can be applied to earthenware, stoneware or porcelain. One coat will produce a translucent finish, two coats will give semi-opaque coverage and three coats will give solid coverage.

The Stroke & Coat glaze is a heavy-bodied, versatile glaze with the widest range of use and application of any Mayco glaze. It is forgiving and goof-proof, making it ideal for beginners and children. It can be used to create intricate, detailed designs, and colours will not blend when butted against one another. Light colours will remain opaque when layered on top of darker colours. The glaze will fire to a gloss finish, and a clear glaze is not required. However, a clear glaze can be used to enhance the glossiness of the finish.

The Stroke & Coat glaze is non-toxic and food-safe. It is also compatible with all Mayco glazes and many competitive glazes. It is a good choice for the "One Fire" method of decorating on bisque, producing a finish that is practically foolproof.

It can be used with other Mayco glazes and many competitive glazes

Mayco Stroke & Coat glazes are compatible with all other Mayco glazes and with many competitive glazes. However, it is not recommended to design on top of fluid, moving glazes, such as Crystalites and Elements, as the work will become distorted.

Stroke & Coat is a heavy-bodied, versatile glaze that has the widest range of use and application of any Mayco glaze. Its extraordinary tolerance and forgiveness allow it to be used in a variety of ways. It can be applied to greenware or bisque, and can be fired from cone 06 to cone 10 in oxidation or reduction. It can be used to create intricate, detailed designs, and colours will not blend when butted against one another. It can also be used in Majolica techniques without the glaze moving or blending into the base glaze beneath.

Stroke & Coat can be applied to a variety of surfaces, including earthernware, stoneware, and porcelain. It can be used to achieve translucent and water-color effects with thin applications, and full opacity with thicker applications. If layered, it can create dimensional effects. The colours in their liquid state accurately represent the fired colour, and the glaze will fire to a gloss finish without the need for a clear glaze. However, a clear glaze may be used to enhance the glossiness of the fired finish if desired.

Stroke & Coat is available in a wide range of colours, including vibrant brights and pastels. It is non-toxic and food-safe, making it ideal for dinnerware.

It is non-toxic and food-safe

Mayco Stroke & Coat glazes are non-toxic and food-safe. They are also versatile and can be applied to wet clay, earthenware bisque, or stoneware bisque. The product was originally developed to be a cone 06 bisque glaze, with a "heavy-duty" performance that would guarantee a good fired result. It is forgiving and can be used by novices, children, or new practitioners. It can be applied to greenware or bisque, and one coat will produce a translucent finish, with subsequent coats increasing opacity. For most applications, three coats will be sufficient for complete opaque coverage.

The Stroke & Coat glaze is also intermixable, meaning that different colours can be blended to create new shades. It can be used to create intricate, detailed designs, and colours will not blend when butted against one another. It can be used in Majolica techniques, and the glaze will not move or blend into the base glaze beneath it. Light colours will remain opaque when layered on top of darker colours, and the liquid-to-fired colour consistency is accurate.

The Stroke & Coat glaze will fire to a gloss finish, and a clear glaze is not required. However, a clear glaze may be used to enhance the glossiness of the finish. The product is compatible with all Mayco glazes and with many competitive glazes. It is not recommended to design on top of fluid, moving glazes such as Crystalites and Elements, as the work will become distorted.

Frequently asked questions