How To Reconstitute Mayco Stroke And Coat Glazes

Mayco Stroke & Coat is a versatile glaze that can be applied to wet clay, leather-hard clay, earthenware bisque, or stoneware bisque. It can be fired from cone 06 to cone 10 and is available in a wide range of colours. It is a heavy-bodied glaze that can smooth out imperfections and can be used as an underglaze or main glaze. It is also intermixable, allowing users to create new colours. Mayco Stroke & Coat is suitable for both novice and experienced practitioners and can be applied with a brush, sponge, or stamp.

Mayco Stroke & Coat can be applied to wet clay, leather-hard clay, greenware, or bisque

Mayco Stroke & Coat is a highly versatile glaze that can be applied to wet clay, leather-hard clay, greenware, or bisque. It is a heavy-bodied, forgiving, and tolerant glaze that can be used by both novice and experienced potters to achieve a range of decorative effects.

When applied to wet clay, Mayco Stroke & Coat can be used as an underglaze or main glaze, providing a glossy finish without the need for a clear glaze. It can be fired from cone 06 to cone 10 and can be used in oxidation or reduction firing. This versatility allows potters to experiment with different techniques and achieve various desired effects.

Mayco Stroke & Coat can also be applied to leather-hard clay, which is clay that has dried to a leather-like consistency. This stage of clay is ideal for intricate detailing and design work as it holds its shape but can still be carved or incised. The glaze can be fired at cone 06, providing a glossy finish that enhances the detail of the piece.

Additionally, Mayco Stroke & Coat can be applied to greenware, which is unfired clay that has been shaped and dried. This allows potters to add glaze before the initial bisque firing, creating a unique look. Greenware should be left partially unglazed to allow for the escape of gases and moisture during firing, ensuring a glossy finish.

Mayco Stroke & Coat can also be applied to bisque, which is clay that has been fired once. This provides a durable and long-lasting finish to the piece. The glaze can be applied to earthenware, stoneware, or porcelain bisque and fired from cone 06 to cone 10, offering a wide range of decorative possibilities.

It can be fired from cone 06 to cone 10

Mayco Stroke & Coat is a highly versatile glaze that can be applied to wet clay, earthenware bisque, or stoneware bisque. It can be fired from cone 06 to cone 10, in oxidation or reduction, and used for a wide range of decorative purposes. The firing range of cone 06 to cone 10 offers artists and potters a great deal of flexibility in their work.

Cone 06 refers to the temperature at which the glaze is fired in a kiln, specifically, around 1838°F (992°C). This temperature is suitable for low-fire glazes and clay bodies and is often used for decorative pottery and ceramic pieces that are not intended for functional use. Firing at cone 06 results in a glossy finish and vibrant colours.

Cone 10, on the other hand, refers to a much higher firing temperature of approximately 2350°F (1287°C). This temperature range is considered high-fire and is suitable for stoneware and porcelain clay bodies. Firing at cone 10 results in stronger, more durable pieces that are ideal for functional pottery, such as tableware and vases. The higher temperature also produces a wider range of colours and effects, including matte and gloss finishes.

The ability to fire Mayco Stroke & Coat at both cone 06 and cone 10 gives artists the option to create a variety of pieces with different characteristics. For example, firing at cone 06 is suitable for decorative pieces that require bright colours and a glossy finish. On the other hand, firing at cone 10 is ideal for creating functional pottery with a more durable finish and a wider range of colour options.

Additionally, the versatility of Mayco Stroke & Coat allows for experimentation with different kiln atmospheres, such as oxidation or reduction firing. Oxidation firing results in a more consistent colour across the surface of the piece, while reduction firing produces varied colours and unique effects, such as speckling or flashing.

It is important to note that the choice of firing temperature and kiln atmosphere will impact the final colour and appearance of the glaze. For example, darker colours tend to maintain their original colour value at higher temperatures, while lighter colours may fade. Therefore, testing and experimentation are recommended to achieve the desired results.

Mayco Stroke & Coat is available in over 70 colours

Mayco Stroke & Coat is a highly versatile and pigmented glaze that can be used on a variety of surfaces, including wet clay, earthenware bisque, and stoneware bisque. It can be fired from cone 06 to cone 10 and used in oxidation or reduction firing, making it suitable for a wide range of decorative applications. One of its standout features is its ability to be used in multiple ways, either as the main glaze or in combination with other glazes to create unique designs.

Speckled Stroke & Coat glazes add a unique dimension to your creations with small specks of contrasting colours, enhancing the visual appeal of your pottery or ceramic pieces. This product line offers unparalleled versatility, making it the ideal choice for professionals and beginners alike, including studio artists, potters, and even students in a classroom setting.

Mayco Stroke & Coat is available in a wide range of colours, with over 70 colours to choose from. Each colour is carefully formulated to maintain its vibrancy even at higher temperatures. The extensive colour selection allows artists to find the perfect shade for their creations, from soft pastels to vibrant primaries and rich earth tones. The range of colours available includes:

• SC-16 Cotton Tail
• SC-37 Ivory Tower
• SC-55 Yella Bout It
• SC-6 Sunkissed
• SC-42 Butter Me Up
• SC-24 Dandelion
• SC-97 Cant-elope
• SC-102 Just Peachy
• SC-23 Jack O’Lantern
• SC-75 Orange-A-Peel
• SC-50 Orange Ya Happy
• SC-2 Melon-choly
• SC-89 Cutie Pie Coral
• SC-88 Tu Tu Tango
• SC-73 Candy Apple Red
• SC-74 Hot Tamale
• SC-87 Ruby Slippers
• SC-81 Cinnamon Stix
• SC-1 Pink-A-Boo
• SC-100 Makin Me Blush
• SC-70 Pink-A-Dot
• SC-95 Pinkie Swear
• SC-17 Cheeky Pinky
• SC-18 Rosey Posey
• SC-3 Wine About It
• SC-40 Blueberry Hill
• SC-13 Grapel
• SC-85 Orkid
• SC-103 Lavendear
• SC-53 Purple Haze
• SC-72 Grape Jelly
• SC-71 Purple-Licious
• SC-33 Fruit Of The Vine
• SC-104 Grape Expectations
• SC-45 My Blue Heaven
• SC-91 Seabreeze
• SC-65 Peri-Twinkle
• SC-30 Blue Dawn
• SC-31 The Blues
• SC-11 Blue Yonder
• SC-58 501 Blues
• SC-76 Cara-bein Blue
• SC-12 Moody Blue
• SC-96 Aqu-ward
• SC-101 Spruce It Up
• SC-9 Jaded
• SC-28 Blue Isle
• SC-10 Teal Next Time
• SC-29 Blue Grass
• SC-32 Bluebeard
• SC-93 Honeydew List
• SC-43 Lettuce Alone
• SC-7 Leapin’ Lizard
• SC-26 Green Thumb
• SC-8 Just Froggy
• SC-36 Irish Luck
• SC-77 Glo-Worm
• SC-78 Lime Light
• SC-98 Slime Time
• SC-27 Sour Apple
• SC-52 Toad-ily Green
• SC-79 It’s Sage
• SC-39 Army Surplus
• SC-86 Old Lace
• SC-54 Vanilla Dip
• SC-20 Cashew Later
• SC-46 Rawhide
• SC-51 Poo Bear
• SC-5 Tiger Tail
• SC-25 Crackerjack Brown

With such a diverse range of colours, artists can let their creativity run wild and bring their unique visions to life.

It can be used as an underglaze or main glaze

Mayco's Stroke & Coat is a highly versatile and pigmented glaze that can be used as an underglaze or main glaze. It can be applied to wet clay, earthenware bisque, or stoneware bisque and fired from cone 06 to cone 10 in oxidation or reduction. This makes it suitable for a wide range of decorative applications.

When used as an underglaze, Stroke & Coat can provide a vibrant base for further glazing. Its versatility allows for a range of effects, from subtle hints of colour to bold, opaque designs. As an underglaze, Stroke & Coat can be applied in thin layers to create delicate hues or mixed with other colours to achieve unique shades.

As a main glaze, Stroke & Coat offers a wide range of colours and can be applied in multiple coats for a more intense finish. It is known for its stability and resistance to running, making it suitable for detailed work. The colours remain true and precise, even after firing, resulting in crisp, clear designs.

One of the benefits of using Stroke & Coat as a main glaze is its ability to be fired at a higher temperature than some other glazes. This makes it suitable for use with stoneware, which often requires higher firing temperatures. Additionally, Stroke & Coat can be applied directly to bisque ware, eliminating the need for a separate underglaze layer.

However, it is important to note that Stroke & Coat may exhibit some movement or bleeding at higher temperatures, especially when applied thickly. This can cause colours to blend or bleed into each other, affecting the precision of the design. To avoid this, it is recommended to layer dark colours over light ones and avoid overlapping colours excessively.

Overall, Mayco's Stroke & Coat offers a versatile and reliable option for both underglaze and main glaze applications. Its wide range of colours, ease of application, and compatibility with various clay bodies make it a popular choice for potters and ceramic artists.

It is non-toxic and food-safe

Mayco Stroke & Coat is a highly versatile and pigmented glaze that can be applied to wet clay, earthenware bisque, or stoneware bisque. It is safe to use and is non-toxic and food-safe.

Being on the market for over 20 years, Mayco Stroke & Coat has been used by thousands of paint-your-own-pottery joints and their hundreds of thousands of customers. This extensive use of the product over a long period of time would have brought to light any potential issues with its safety.

To ensure the safety of the glaze, it is important to fire it to the listed temperature over a bisque fired to a specific temperature. Using cones when firing can ensure even and complete firings. Most coloured commercial glazes, including Mayco Stroke & Coat, are made with Frits, which are glazes that have been fired, then reduced to a crushed powder that fires to a predictable colour every time. Frits are much safer than raw ingredients as the raw colourants are already safely melted into the frit.

To further test the safety of the glaze, a 'leeching' test can be performed. This involves glazing the interior of a small bowl, firing it, and then putting a quarter cup of fresh lemon juice into the bowl and leaving it for two days. After this period, the juice is poured out, the bowl is washed, and the glaze is examined closely. If there are any changes in the colour or gloss of the glaze between the area that the juice pooled and where it didn't, then the glaze is not considered 100% food-safe.

Even if there is a small amount of leeching, a person would have to ingest corrosive foods from the vessel multiple times a day for several years to experience any adverse effects.

Frequently asked questions